RA2 ON WINDOWS 10 HOW TO

Load the preprinted paper face up into the stack bypass tray, as shown in the illustration below. (see image) Insert the paper into the bypass tray and adjust the guide. This documentation will provide step-by-step instructions for envelope printing on your Ricoh/Savin device.

When media is detected in the Bypass Tray a paper settings screen is displayed. 2) Under the paper window click on the drop down icon on to the right of the window, then choose the Select by Tray option and finally select the Tray 5 (Bypass) option. On the printers control panel, Select System Settings / Paper Tray Settings / and then Tray Settings. Next, make sure your paper is set properly in the Main Tray (not the bypass tray). Place the paper stack into Tray 1, and slide the paper guides so that they are against the sheets. I tried this way, set the default printer from IE and adjust the setting from MS Word, also cannot. Open Tray 1, and pull the tray extension away from the product.

Click File > Print and select SU-Print-Queue. Select the appropriate paper type from the drop down menu, under Paper Type. Load one envelope at a time in the bypass tray. Use the photo bypass tray, which is locate on top of the output paper tray cover, to print on Photo (4' x 6') and Photo L (3. If the paper feed orientation is, insert paper print side down in the bypass tray, and set the bottom edge of the paper toward you.

Using Bypass tray on printer Sharp MS 2614 - Hi all I?m try to use Bypass tray in a Sharp MS 2614 if i set tray number 3 in my PRTF, the paper not come taken from Bypass tray ? which could be the problem ? Thanks in advance Device configuration: 5761SS1 V6R1M0 080215 S 29/06/18 13:25:26 CEST Descrizione unitГ .

The printer needs to вЂњrecognizeвЂќ the 11вЂќ x 14вЂќ Heavy Paper size. The Bypass Tray for the Virtuoso SG400/SG500 printer adds an extra paper feed tray and increases paper size capacity.

RA2 ON WINDOWS 10 HOW TO

What do you do when you've selected the bypass tray but it just refuses to print? In this tutorial, I demonstrate how to print to the bypass tray from Micro. The first step is to load the paper you are using: Login to the Toshiba. Settings to Use the Bypass Tray under the Printer Function.

Setting the media type of the bypass tray to 'Labels' doesn't improve the result.

The bypass tray attaches easily to the back of the machine, and can be set up within a PowerDriver to allow for sublimation printing

Ra2 on windows 10